25
8. Fill the smaller upper hole and the two large ones
with the corresponding plastic plug caps supplied
in the bag containing the instruction booklet.
Important!
All the different plug caps are supplied with the appli-
ance in the plastic bag containing the instruction
booklet.
Connect the water inlet hose as described under the
paragraph “Water inlet”.
Where to install
Important! The appliance must not be used in a
room where there is a danger of frost. Frost damage
or impaired operation! Frost damage is not covered
by the warranty.
• The surface on which the appliance is to be in-
stalled must be firm and level. Do not install the
appliance on carpets or on soft floor coverings.
• The surface on which the appliance is to be in-
stalled must be clean and dry and free from cover-
ings that move, so that the appliance does not
slide.
• If the location in which the appliance is to be in-
stalled is fitted with small-format tiles, put a rubber
mat (available in the shops) under the appliance.
Making the appliance level
The four feet of the appliance are pre-adjusted.
Large degrees of unevenness can be compensated
for by individually adjusting the height adjustable
screw feet.
Use the special spanner supplied to do this.
Important! Do not use pieces of wood, cardboard or
such like to level out unevenness in the floor, but ad-
just the height adjustable screw feet instead.
