● Do not secure a child restraint in the

center rear seating position using the

LATCH anchors. The child restraint will

not be secured properly.

● Child restraint anchor points are de-

signed to withstand only those loads

imposed by correctly fitted child re-

straints. Under no circumstance are

they to be used for adult seat belts or

harnesses.

Installing child restraint LATCH anchor

attachments

LATCH compatible child restraints include two

rigid or webbing-mounted attachments that can

be connected to two anchors located at certain

seating positions in your vehicle. With this sys-

tem, you do not have to use a vehicle seat belt to

secure the child restraint. Check your child re-

straint for a label stating that it is compatible with

LATCH. This information may also be in the in-

structions provided by the child restraint manu-

facturer.

LATCH child restraints generally require the use

of a top tether strap. See “Top tether strap child

restraint” later in this section for installation in-

structions.

When installing a child restraint, carefully read

and follow the instructions in this manual and

those supplied with the child restraint. See “Child

restraint installation using LATCH” later in this

section.

LATCH webbing-mounted attachment

LRS0661

LATCH rigid-mounted attachment

LRS0662

1-18 Safety—Seats, seat belts and supplemental restraint system

Z REVIEW COPY—

2008 Versa (vrs)

Owners Manual—USA_English (nna)

01/02/08—debbie