9-10 Opening the OfficeBridge Administrator Settings
Opening the OfficeBridge Administrator Settings
You can open the Administrator Settings for OfficeBridge from the installer.
This operation cannot be performed with a local (USB) connection.
Click [Machine Settings (for Administrator)].
1
Set the IP address of the machine that is connected.
2
Enter the IP address in the “XXX.XXX.XXX.XXX” format (where XXX is a number between 0 •
and 255).
You cannot enter “0.0.0.0”.•
If you do not know the IP address, you can detect the IP address of connected devices on the •
“Device Search” screen. First, click [Search] to display the Device Search screen. Next, click
[Refresh]. If the “Windows Security Alert” screen is displayed, click [Unblock], and then click
[Refresh] again. Select the device name from the list, and click [OK]. (The “Windows Security
Alert” screen is not displayed from the second time you perform this operation.)
Click [Display].
3
The browser will open and you can log in with the administrator mode.
For details, refer to the OfficeBridge Guide.
