Multi-function display
a Display
b Display indicator lights
c This button has the following two
functions:
– changes the display from
Load %
,
Detergent %
and
Time left h/mins
– sets the load sensors to zero
To enable you to wash environmentally
and economically:
–
the washing machine calculates the
amount of laundry loaded. This is
displayed as a % figure:
25/50/75/100%.
–
the amount of detergent required is
then displayed as a % figure:
40/50/60/75/100%.
In other words dispense this % of the
total amount of detergent
recommended by the manufacturer
for a full load of laundry. The water
hardness level and type of soiling
also need to be considered when
deciding how much detergent to use.
–
the duration of the programme
depending on the programme and
the amount of the load (Time left
h/mins).
Please note that
Load %
depends
on the programme selected and
applies to dry laundry only.
Important:
Loads of less than 25% will not
register in the display. However, the
dispensing recommendation will
show the minimum value of 40%.
Please note that in the following
programmes the display will only show
the time left:
– Separate rinse
– Drain /spin
– Starch
The display will also show:
–
Delay start
–
The programmable functions
(when in programming mode)
Description of the appliance
12
