§
Heating system fault
Programme stop
Press the start button.
if
^
To continue the programme with heating
press the h "Start" button. If a disinfection
programme was running the programme
will be cancelled if this message appears.
Call the Service Department.
m
Drive motor fault
Programme stopped. Press the start button.
Motor overheating.
if
^
Allow the motor to cool down.
§
Imbalance fault
Call the Service Department
if restart does not work.
i A
The imbalance is too great and the
imbalance switch has been activated.
^ Switch the machine off and on again.
Then press the h "Start" button.
§
Gas system fault
Open the gas tap.
Press the start button.
if
If this message appears before a
programme has been started:
^
Open the gas tap and then press the "h
Start" button.
If this message appears during a
programme the pressure in the gas supply
has dropped because of other gas heated
appliances operating at the same time.
^
Press the h "Start" button.
§
Gas system fault
Call the Service Department
if restart does not work.
if
^
If the programme still will not start please
call the Service Department.
§
Gas system fault
Clean the lint filter.
Press the start button.
if
Clean the lint filter as described in "Cleaning
and care" and then press the h "Start"
button.
On gas heated machines heavy foaming can
lead to a fault.
q
Drain valve fault
Call the Service Department
if restart does not work.
if
^ Check the on-site drainage system and
then press the "h Start" button.
A defective drain valve must be repaired by
a Miele Service technician only.
ö
Dispensing system fault
Fill dispenser 1
Press the start button.
if
Replace the empty container with a full one.
§
Card fault
Card incorrectly inserted in card reader.
Continue: Press start.
if
^
Insert the card the right way round in the
card reader.
Problem solving guide
M.-Nr. 06 572 490 33
