Article No. 01-6-2 Cont’d.
PATS DIAGNOSTIC (Continued)
System Types A
Action and D System Type B System Type C System Type E
Replacing PATS NOTE: ONLY ONE NOTE: MAKE NOTE: MAKE See “Replacing PCM”
Module (or VIC, HEC, (1) KEY REQUIRED SURE VEHICLE SURE VEHICLE Action
SCIL, or ICM) Required IN ORDER FOR BATTERY IS BATTERY IS
Actions VEHICLE TO DISCONNECTED DISCONNECTED
START, EXCEPT WHEN REPLACING WHEN REPLACING
FOR MARK VIII (2 PATS CONTROL VIC/HEC/ICM
KEYS ARE MODULE, MODULE,
REQUIRED FOR OTHERWISE OTHERWISE
MARK VIII). MAKE PROPER PROPER
SURE ALL INITIALIZATION INITIALIZATION
ADDITIONAL KEYS WILL NOT OCCUR WILL NOT OCCUR
ARE PROGRAMMED AUTOMATICALLY AUTOMATICALLY
USING SPARE KEY (AND WILL (AND WILL
PROGRAMMING REQUIRE NGS REQUIRE NGS
PROCEDURE. DIAGNOSTIC CARD DIAGNOSTIC CARD
BE USED TO BE USED TO
PERFORM PCM, PERFORM PCM,
ACTIVE ACTIVE
COMMANDS, KEEP COMMANDS, KEEP
ALIVE MEMORY ALIVE MEMORY
RESET). RESET).
WHEN REPLACING
AN INSTRUMENT
CLUSTER ON A
2000 OR 2001
LINCOLN LS BE
SURE TO
DISCONNECT THE
VEHICLE BATTERY.
FAILURE TO
DISCONNECT THE
BATTERY MAY
RESULT IN
SHORTING THE
PATS
TRANSCEIVER
UPON REPLACING
THE INSTRUMENT
CLUSTER. THIS
WILL RESULT IN
BLOWING FUSE
#224 IN THE CJB.
WHEN THIS FUSE
IS BLOWN, A NO
START SITUATION
WILL OCCUR AND
A B1681 PATS
CODE STORED.
PAGE 8
