It is recommended to make initial configuration changes by connecting a
PC directly to one of the Wireless Router's LAN ports. The Wireless Router
has a default IP address of 192.168.0.1 and a subnet mask of
255.255.255.0. If your PC is set to ―Obtain an IP address automatically‖
(that is, set as a DHCP client), you can connect immediately to the web
interface. Otherwise, you must set your PC IP address to be on the same
subnet as the Wireless Router (that is, the PC and Wireless Router
addresses must both start 192.168.0.x).
1. Use your web browser to connect to the management interface using
the default IP address of 192.168.0.1.
2. Log into the Wireless Router management interface by entering the
default user name ―admin‖ and password ―password,‖ then click OK.
NOTE: It is strongly recommended to change the default user name and
password the first time you access the web interface. For information on
changing user names and passwords, see ―Administration Settings‖ on
page 95.
