Wireless Router, then click the ―Clone your PC‘s MAC Address‖ (Default:
Disable)
STEP 3 - WAN
SETTINGS - PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Wizard Step 3 - WAN Settings - PPTP
The following items are displayed on this page:
Server IP — Sets the PPTP server IP Address. (Default: pptp_server)
User Name — Sets the PPTP user name for the WAN port.
(Default: pptp_user; Range: 1~32 characters)
Password — Sets a PPTP password for the WAN port. (Default:
pptp_password; Range: 1~32 characters)
Verify Password — Prompts you to re-enter your chosen password.
Address Mode — Sets a PPTP network mode. (Default: Static)
IP Address — Sets the static IP address. (Default: 0.0.0.0, available
when PPTP Network Mode is set to static IP.)
C
HAPTER
4 | Initial Configuration
Setup Wizard
