Error log code Description
54.2801 Sensor color plane registration contaminated
55.0000 Engine comm fatal error
55.0001 Engine comm critical error
55.1000 DC controller memory error
57.0000 Fan motor error
57.0001 Fan cartridge failure
59.0000 Paper path/ETB rotation failure
59.0001 Paper path/ETB ramp up failure
101.0000 Color plane registration error
102.0000 DMAX calibration error
103.0000 DHALF calibration error
Service menu settings
The service menu is used to calibrate, restore factory default settings, and clean the print paper path.
The following service menu items are available:
Ŷ Restore defaults—used to reset all customer-accessible menu settings back to the factory
default settings (except language) via the control panel or software
NOTE This service menu item does not reset factory-settable settings, including
formatter number, page counts, factory paper settings, language, and so on.
Ŷ PowerSave—used to configure the amount of idle time before the engine enters sleep mode
Ŷ Cleaning mode—used to remove dust and toner from the print paper path
Secondary service menu
The secondary service menu is intended for use by manufacturing engineers, service engineers,
developers, and support personnel. This menu provides options to perform various tests and print
out special reports.
Table 6-5 Status log messages (continued)
www.partshere.com Partshere Troubleshootingwww.partshere.com Partshere Troubleshooting
