B
C
D
Cam Lock
G
Assembly Instructions 2/4
STEP 1
Attach Side Panels (B), (C) and Middle Panel (D) to Base (G) with Cam Locks. (see Figure 2)
G
A
Cam Lock Screw
Attach Legs (H) to Base (G) with Head Cap Bolts. (see Figure 1)
Put Cam Lock Screws into the pre-drilled holes of Top (A), Base (G) and tighten.
STEP 2
G
Head Cap Bolt
H
H
H
H
Figure 1
Figure 2
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
