701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
F-40028 – SR24 Dishmachine Page 3 of 4
SR24
DISHMACHINE
INSTALLATION REQUIREMENTS AND INSTRUCTIONS
1. A single ll and rinse pipe connection is required. 6' ex hose supplied.
2. The electrical connection location for a
3
⁄4" electrical connector (1
1
⁄8" diameter hole) is provided for the
SR24H model only.
3. The required electrical cord and plug are supplied on the SR24C model only.
4. Important: The sodium hypochlorite container should be placed on the oor (SR24C model only).
5. If the sodium hypochlorite container is to be placed in a cabinet adjacent to the machine, a
1
⁄2" diameter
hole is required in the cabinet to run the bleach supply line through.
6. Pumped drain
3
⁄4" MPT tting 10' hose supplied.
7. A supply line strainer is required. (By others)
8. If water owing pressure is over 28 psi, install a PRV (not supplied). If water owing pressure is under
22 psi, the supply line pressure must be increased.
