9
ErP Directive
This product complies with the Directive 2009/125/EC and European Union Commission Regulation
1275 /2 008 .
1. For each condition providing networked standby into which the equipment is switched by the
power management function or similar function:
— the power consumption data in Watt rounded to the first decimal place:
For H3C MSR930
Type of network port
Max power in network standby/sleep mode if only
this
ort is used for remote reactivation
1 RJ-45 autosensing 10/100/1000 WAN
ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab
Type 1000BASE-T)
4.82 Watts
4 RJ-45 autosensing 10/100/1000 LAN
ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX)
4.84 Watts
For H3C MSR930(SA)
Type of network port
Max power in network standby/sleep mode if only
this
ort is used for remote reactivation
1 RJ-45 autosensing 10/100/1000 WAN
ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab
Type 1000BASE-T)
5.89 Watts
4 RJ-45 autosensing 10/100 LAN ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX)
5.89 Watts
1 Serial port 5.23 Watts
— the period of time after which the power management function, or a similar function switches
the equipment automatically into the condition providing networked standby: The product goes
into Idle mode immediately after the last packet has passed on the network.
2. the power consumption of the product in networked standby if all wired network ports are
connected and all wireless network ports are activated: For H3C MSR930 7.72Watts, For H3C
MSR930(SA) 9.0 Watts
3. guidance on how to activate and deactivate wireless network ports: See Command Reference
Guide at http://www.h3c.com/portal/Technical_Support___D
ocuments/Technical_Documents/
