MBR L13 – User’s Guide
14
The first attempt to enter to the WBM from a computer connected to L13 will display the installation wizard. To setup
your gateway, follow the wizard procedure steps.
3.1.1 Installation Wizard
Once L13 is physically connected, an Installation wizard will be started, and it will automatically analyze your network
environment and configure its components. As explained in the first screen, the installation wizard is a step-by-step
procedure that guides you through establishing an Internet connection, a cellular network connection, setting up the
WiFi and the external VoIP line. The wizard progress box, located at the right hand side of the screen, lists all of the
wizard’s steps and indicates the current step.
Figure 8: First Login Installation Wizard
To start the installation wizard, click Next. The installation process will commence, performing the steps listed in the
progress box consecutively and stopping only if a step fails or if input is required. The following sections describe the
wizard steps along with their success/failure scenarios. If a step fails, use the Retry or Skip buttons to continue.
3.1.1.1 Step 1: Cellular setup
Figure 9: Cellular Setup
This step is configuring your cellular connection. The L13 will register automatically to the network. You may be asked
to enter a 4 digit SIM card PIN code provided by your operator.
Check that the SIM card is installed in the SIM card holder
Enter the PIN code, permit roaming, etc.
