MBR L13 – User’s Guide
10
A small hole with a button inside. It is used to reset the L13 to its factory
default configuration. Pressing the button for 30 seconds continuously while
the power is on will reset the device to its factory default settings. Pressing the
button for less than 30 seconds will reset the device.
Phone port for connecting a standard analog phone (FXS).
Ethernet LAN ports for connecting the unit to PCs or an Ethernet switch/hub.
Usually used for connecting external storage devices and shared printers.
Power socket for connecting the provided power supply adapter.
Note: Do not use any other power adapter except the one that accompanies
the unit. Use of other adapter could result in damage to the unit.
2.3.2 Top Panel Interfaces
The top side of the L13 has a SIM card slot.
Figure 4: Ericsson L13 Top Panel
The table below describes the interfaces:
Table 2: L13 Top Panel Interface
SIM card slot for inserting a SIM card.
Note: The L13 must be disconnected from the power mains when inserting or
removing the SIM card.
