82
The following table describes the parameters of this page:
Select to set the password for the incoming Get- and
GetNext requests from the management station.
Select to set the password for incoming Set requests from
the management station.
5.6.4. UPnP
Choose Access Management > UPnP, the page shown in the following figure
appears. This page is used to configure the UPnP parameters.
UPnP (Universal Plug and Play) is a distributed, open networking standard
that uses TCP/IP for simple peer-to-peer network connectivity between
devices. An UPnP device can dynamically join a network, obtain an IP address,
convey its capabilities and learn about other devices on the network. In turn,
a device can leave a network smoothly and automatically when it is no longer
in use. UPnP broadcasts are only allowed on the LAN.
The following table describes the parameters of this page:
You can choose Activated or Deactivated.
UPnP network devices can automatically configure
network addressing, announce their presence in the
network to other UPnP devices and enable exchange of
simple product and service descriptions.
