Vigor3200 Series User’s Guide
330
3. Open VPN and Remote Access>>VPN TRUNK Management. Add these VPN profiles
to the VPN Trunk and set Load Balance as the Attribute Mode. Setting configuration is
the same as Scenario 1. Profile 1 and Profile 2 are one pair; Profile 3 and Profile 4 are the
other pair.
4. When the VPN trunk is successfully connected, you may check the connection status by
viewing the page of VPN and Remote Access>>Connection Management. Transferred
packets (Tx Pkts) will keep increasing through both tunnels when outgoing packets sent
to the remote VPN network.
