Vigor2700 Series User’s Guide
139
Automatically Update Interval
Select a time interval for updating from the NTP server.
Click OK to save these settings.
3
3
.
.
1
1
2
2
.
.
6
6
M
M
a
a
n
n
a
a
g
g
e
e
m
m
e
e
n
n
t
t
This page allows you to manage the settings for access control, access list, port setup, and
SMP setup. For example, as to management access control, the port number is used to
send/receive SIP message for building a session. The default value is 5060 and this must
match with the peer Registrar when making VoIP calls.
Enable remote
firmware upgrade
Chick the checkbox to allow remote firmware upgrade through FTP
(File Transfer Protocol).
Allow management
from the Internet
Enable the checkbox to allow system administrators to login from the
Internet. By default, it is not allowed.
Disable PING from
the Internet
Check the checkbox to reject all PING packets from the Internet. For
security issue, this function is enabled by default.
Access List
You could specify that the system administrator can only login from
a specific host or network defined in the list. A maximum of three
IPs/subnet masks is allowed.
List IP - Indicate an IP address allowed to login to the router.
Subnet Mask - Represent a subnet mask allowed to login to the
router.
Default Ports Check to use standard port numbers for the Telnet and HTTP servers.
User Defined Ports Check to specify user-defined port numbers for the Telnet and HTTP
servers.
Enable SNMP Agent Check it to enable this function.
Get Community Set the name for getting community by typing a proper character. The
default setting is public.
