Dotted line is with high boost grid (optional) and solid line with soft boost grid.
5
250 Hz
125 Hz
20 kHz
8 kHz
2 kHz
1 kHz
500 Hz
Black line is near field (2 – 3 cm/0.8 – 1.2 in).
Green line is far field (more than 30 cm/12 in).
DPA 2014 | 36-37
d:fine
TM
Headset Mics
Order numbers (90 mm / 110 mm) Order numbers (100 mm / 120 mm)
FIO66F00-M2 / FIO66F00-2 FIO88F00-M / FIO88F00
FIO66B00-M2 / FIO66B00-2 FIO88B00-M / FIO88B00FIO66C00-M2 / FIO66C00-2 FIO88C00-M / FIO88C00
Frequency Response Polar Pattern
Directional Characteristics (normalized)
Key features
Perfect for performers in motion, the d:fine omni
headset mic, d:fine
TM
66, uses a sturdy, comfortable
dual-ear headset that is available in black, brown
or beige. The 4066 capsule is optimized for high
speech intelligibility, low distortion and humidity
resistance and can be mounted on booms of 90
or 110 mm lengths. Designed for professional use, the
connector splits the cable from the microphone boom
allowing for quick swapping of broken cables and/or
wireless connectors.
An optional high boost grid is available.
Specifications
Frequency Response Polar Pattern
Directional Characteristics (normalized)
Key features
The d:fine 88 directional headset mic is the perfect
choice when o-axis noise is a challenge. The new,
single-ear headset comes in black, brown or beige
oering supreme comfort and a low profile. By rotating
the boom, the d:fine 88 directional headset mic
can be oriented on the performer’s left or right side.
The 4088 capsule is optimized for natural, open vocal
reproduction and comes in boom lengths of 100 or 120
mm. The headset features a pre-mounted makeup and
moisture filter and three foam windscreens.
Specifications
Directional characteristics:
Omnidirectional
Frequency range, ± 2 dB:
Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz.
Sensitivity, nominal, ±3 dB at 1 kHz:
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
68 dB (A)
Dynamic range:
Typ. 97 dB
Max. SPL, peak before clipping:
144 dB
Power supply:
Min. 5 V through DPA adapter for wireless systems.
48 V phantom power ± 4 V with DAD6001-BC XLR adapter.
Connector:
MicroDot
Cable length:
1.25 m (4.1 ft)
Directional characteristics:
Cardioid
Frequency range, +/- 2 dB, Near field 2-3 cm:
100 Hz – 20 kHz (4 – 6 dB soft boost at 15 kHz)
Sensitivity, nominal, ±3 dB at 1 kHz:
6 mV/Pa; 44 dB re. 1 V/Pa
Equivalent noise level, A-weighted:
Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
68 dB (A)
Dynamic range:
Typ. 97 dB
Max. SPL, peak before clipping:
144 dB
Power supply:
Min. 5 V to max. 50 V through DPA adapter for wireless systems. 48 V
phantom power ± 4 V with DAD6001-BC XLR adapter.
Connector:
MicroDot
Cable length:
1.25 m (4.1 ft)
66 Dual-Ear Omnidirectional Headset Microphone
90 and 110 mm Boom (3.5” or 4.3”)
88 Single-Ear Directional Headset Microphone
100 and 120 mm Boom (3.9¨or 4.7¨)
