SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 804 SYSTEM I/O PARAMETER
DESCRIPTION:
Provides a means of setting parameters for the SIMs (Serial Interface Modules) to work with one
of the followings:
• a personal computer
• with SMDR recording
• with UCD staticics report/periodic UCD informations
• CTI(TSAPI) interface.
Programming can be accomplished easily with the tables below to customize any SIM port.
PARAMETER OPTIONS
Dial 0 Service Type of Service
Dial 1 Baud Rate Speed
Dial 2 Char Length Character Length
Dial 3 Parity Parity Bit
Dial 4 Retry Count Number of Retries
Dial 5 Stop Bit Stop Bit
Dial 6 Wait Time Message Wait Time
Dial 7 SIM Pair Station Number Connected to SIM
SERVICE TYPE
Dial 0 PCMMC PCMMC
Dial 1 SMDR SMDR
Dial 2 CTI Dedicated Switch Link Interface
Dial 3 CTI/SMDR Switch Link Interface along with SMDR
Dial 4 UCD REPT UCD Report on request by the Suprevisor or daily
Dial 5 SMDR/UCD Both SMDR and UCD Report will be generated
Dial 6 Not used
SPEED
Dial 0 1200 bps
Dial 1 2400 bps
Dial 2 4800 bps
Dial 3 9600 bps
Dial 4 19200 bps
CHARACTER LENGTH
Dial 7 7 bits
Dial 8 8 bits
PARITY
Dial 0 None
Dial 1 Odd
Dial 2 Even
STOP BIT
Dial 1 1 bit
Dial 2 2 bit
