SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL December 1996
MMC: 103 SET ANSWER
MODE
DESCRIPTION:
Allows a system administrator to change the answer mode of any keyset or add-on module. Each
keyset or add-on module can have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing
the ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer calls on the
speakerphone. When a C.O. line is transferred to a keyset in Auto Answer, the screened portion
of the call will be Auto Answer, but the keyset or add-on module (AOM) will ring when the transfer
is complete if the user has not pressed the ANS/RLS key or lifted the handset.
2.. VOICE: The keyset will not ring. After a short attention tone, callers can make an
announcement but the ANS/RLS key or handset must be used to answer calls.
PROGRAM KEYS
UP & DOWN Used to scroll through options
KEYPAD Used to enter selections
SOFT KEYS Move cursor left and right
SPK Used to store data and advance to next MMC
HOLD Used to clear previous entry
ANS/RLS Used to select ALL
ACTION DISPLAY
1. Press TRSF 103
Display shows
[201] ANS MODE
RING MODE
2. Dial keyset number (e.g., 205)
OR
[205] ANS MODE
RING MODE
Press UP or DOWN to select keyset
and press RIGHT soft key to move cursor
OR
Press ANS/RLS to select All
[ALL] ANS MODE
?
3. Dial 0, 1 or 2 to change ring mode
OR
[205] ANS MODE
VOICE ANNOUNCE
Press UP or DOWN to select ring mode and
press RIGHT soft key to return to step 2 above
4. Press TRSF to store and exit
OR
Press SPK to store and advance
to next MMC
DEFAULT DATA: ALL KEYSETS RING
RING FREQUENCY DEFAULT IS 5
