Page 14 Radiation Shield Manual
2. Secure the mounting bracket to the Radiation Shield using a #8 flat washer, #8 split
lock washer and #8 hex nut one each of the screw ends.
Tighten until the mounting bracket is firmly attached to the Radiation
Shield.
ATTACHING RADIATION SHIELD TO MOUNTING BRACKET
3. Hold the mounting bracket against the pipe and slide the ends of the two 1 1/2”
U-bolts through the holes in the back of the mounting bracket so that the U-bolts
wrap around the pipe.
4. Secure the mounting bracket to the pipe using a 1/4” flat washer and a 1/4” hex nut on
each end of the 1 1/2” U-bolts.
Tighten until the mounting bracket is firmly attached to the pipe.
ATTACHING MOUNTING BRACKET TO A PIPE
#8 Lock Washer
#8 Hex Nut
#8 Flat Washer
Complete Plate
Assembly
1-1/2" U-Bolts
1/4" Flat Washer
1/4" Hex Nut
Complete
Plate
Assembly
