Appendix - Parameter List
Print Server User Manual 227
* Port number of the print server (e.g. LPT 1-3, COM1 or USB 1-5)
nf*_mAccPCntTime1
nf*_mAccPCntTime2
[time interval]
max. 4 characters;
[0-9]
0-9999
Defines the time interval (in hours) in
which an email will be sent to recipient 1 or
2.
The emails contain information about the
number of printed pages of a printer.
nf*_mAccPCntCnt1
nf*_mAccPCntCnt2
[page interval]
max. 4 characters;
[0-9]
0-9999
Defines after how many printed pages an
email will be sent to recipient 1 or 2.
The emails contain information about the
number of printed pages.
nf*_trap_mask1
nf*_trap_mask2
Paper jam = 1
Paper empty = 2
Toner low = 4
Cover open = 8
Toner empty = 16
Cassette not ready
= 32
Warming up = 64
Offline = 128
Engine error = 256
No select = 512
Service call = 16384
Miscellaneous error
= 32768
Defines the printer errors of which
recipient 1 or 2 is informed by a trap.
A trap contains information about the
printer error.
Each code represents a message.
By adding these codes, several printer
errors can be indicated at once.
Not all print server models support all
printer error messages.
nf_trap_ip1
nf_trap_ip2
[IP Address]
valid IP address Defines the IP address of the recipient to
which the traps will be sent.
The traps contain information about the
printer error. You can define 1 or 2
recipients.
nf_trap_com1
nf_trap_com2
[Trap community]
max. 15 characters Defines the Trap community of recipient 1
or 2.
nf_trap_aut1
nf_trap_aut2
[Authentication
traps]
on/off Enables/disables the sending of traps
containing authentication information for
recipient 1 or 2.
nf_trap_pr1
nf_trap_pr2
[Printer traps]
on/off Enables/disables the sending of traps for
selected printer errors for recipient 1 or 2.
Parameters
Value Description
