Prodotti del Marchio D-Link

ConfiguringtheEthernetSettings

D-Link UnifiedAccessPointAdministrator’sGuide

November2011 Page25

UnifiedAccessPointAdministrator’sGuide

4. Attheloginprompt,entergetmanagement.

Informationsimilartothefollowingprintstothescreen.

ConfiguringtheEthernetSettings

ThedefaultEthernetsettings,whichincludeDHCPandVLANinformation,mightnotworkforallnetworks.

Bydefault,theDHCPclientontheUAPautomaticallybroadcastsrequestsfornetworkinformation.Ifyouwant

touseastaticIPaddress,youmustdisabletheDHCPclientandmanuallyconfiguretheIPaddress

andother

networkinformation.

ThemanagementVLANisVLAN1bydefault.ThisVLANisalsothedefaultuntaggedVLAN.Ifyoualreadyhave

amanagementVLANconfiguredonyournetworkwithadifferentVLANID,youmustchangetheVLANIDof

themanagementVLANontheaccesspoint.

For

informationaboutusingtheWebinterfacetoconfiguretheEthernetsettings,see“EthernetSettings”on

page51.YoucanalsousetheCLItoconfiguretheEthernetsettings,whichthefollowingsectiondescribes.