Prodotti del Marchio D-Link

ConfiguringClientQoS

D-Link UnifiedAccessPointAdministrator’sGuide

November2011 Page180

UnifiedAccessPointAdministrator’sGuide

addclass‐mapclass_voipeveryyesprotocoludpsrc‐ip192.168.1.0src‐ip‐mask255.255.255.0dst‐

ip192.168.2.200dst‐ip‐mask255.255.255.255

3. Addapolicymapnamedpol_voip.

addpolicy‐mappol_voip

4. Definethepol_voippolicymapbyaddingtheclass_voipclassmapandspecifyingthatpack etsthatmatch

theclass_voipcriteriawillbemarkedwithaDSCPvalueofEF(expeditedforwarding).

addpolicy‐attrpolicy‐map‐namepol_voipclass‐map‐nameclass_voipmark‐ip‐dscpef

5. EnableClientQoSontheAP.

setclient‐qosmodeup

6. EnableClientQoSonVAP2

setvapwlan0vap2qos‐modeup

7. Applypol_voiptoVAP2intheinbounddirection(fromtheclienttotheAP).

setvapwlan0vap2def‐policy‐uppol_voip

ConfiguringQoSbyUsingSNMP

ACLConfiguration

1. LoadtheDLINK‐WLAN‐ACCESS‐POINT‐MIBmodule.

2. FromtheMIBtree,navigatetotheobjectsintheapQos>apAclTable.

3. UsetheapQosAclStatusobjecttocreatearowentrywithapQosAclNameandapQosAclType astheindexes

forapQosAclEntry.

ThenewapQosAclEntryvalueincludestheapQosAclType(1)followedbythenumber

ofcharactersinthe

name(4),andthentheASCIIcodeforthename.Inthisexample,acl1is97.99.108.49.Thevaluetosetis4,

whichisCreateandGo.

4. Addaruletoacl1thatallowsHTTPtrafficfromthe192.168.1.0subnet.

•Use1.3.6.1.4.1.6132.1.1.28.10.3.1.14.1.4.97.99.108.49.1tosettheapQosAclRuleStatus

ofRule1to

active(1)

IntheOID,the14(bold)isthesequenceidentifierfortheapQosAclRuleStatussobject,1istheACLtype,

4.97.99.108.49istheACLname(thenumberofcharactersfollowedbytheASCIIcode),andthefinal1