8
Microphone DM05
Change code
If the pairing button is instead held down for ten seconds, the function
indicator will switch to a red light.
If you release the pairing button when the function indicator is red,
Change
code
mode is activated.
Press the pairing button twice in quick succession to generate a random code,
and at the same time the pairing information is transmitted (make sure that
other Digisystem units to be paired are activated to receive pairing informa-
tion).
Five red flashes in the function indicator confirm that the pairing information
(channel and code) has been sent.
Factory reset
If the pairing button is instead held down for 20 seconds, the function
indicator will switch to an alternating red and green light. The
Factory reset
mode is now activated.
To perform a factory reset, press the pairing button once quickly. The function
indicator flashes the number of times corresponding to the channel, see
section
Radio Range and Channels.
The channel and code are now reset to the factory settings.
Pair
Microphone DM05 must be paired using the pairing button, see section
Pairing (via pairing button)
.
Pairing
To use a receiver and transmitter together, they must be paired. All
transmitters and receivers are default paired at the factory and will work
together.
NB! To prevent eavesdropping, a new code key must be generated and
transmitted between the units by pairing.
Transmitting/receiving of pairing information along with a new code can be
performed from any Comfort Digisystem unit with a display.
To pair units without a display, see sections
Pairing (via pairing button)
.
Pairing information or a new code key can be received by several activated
units.
