
Handling the side seat
Access to row 3
1. Place the head restraint in the low position.
2. Push lever B upwards as far as possible.
3. Fold the seat back onto the seat cushion and guide the tilting of
the seat back forwards until the rear anchorages are unlocked.
Exit from row 3
1. Place the head restraint in the low position.
2. Pull control C .
3. Guide the tilting of the seat back forwards until the rear
anchorages are unlocked.
Removing the side seat
1. Tilt the seat back forwards to detach the rear anchorages.
2. Grab the red strap which appears and pull it upwards, the front
anchorages unlock .
3. The strap, like the handle, enables you to remove the seat.
Re tting the side seat
1 . Place the front anchorages at the front stop in the slides.
Support the strap rmly for easier positioning of the seat.
2. Tilt the folded seat towards the rear. The rear anchorages lock.
3. Raise the seat back.
4. Slide the seat .
ROW 2 CENTRE SEAT
Removing the centre seat
1. Place the seat in the "low table" position.
2. Using the control which you pull, tilt the seat back forwards so
releasing the rear anchorages from the slides.
3. Grab the red strap which appears and pull it upwards, the front
anchorages unlock .
4. The strap, like the handle, enables you to remove the seat.
REAR SIDE SEATS
Re tting the centre seat
1 . Place the front anchorages at the front stop in the slides.
Support the strap rmly for easier positioning of the seat.
2. Tilt the folded seat towards the rear. The rear anchorages lock.
3. Raise the seat back and slide the seat.
REAR BENCH SEAT
Seat back folded position
1. Place the head restraints in the low position.
2. Pull the strap C upwards, from the tailgate.
3. Tilt the seat back on the seat cushion.
Vertical position of the bench seat
1. Place the head restraints in the low position.
2. Pull the strap C upwards, from the tailgate.
3. Fold the seat back onto the seat cushion.
4. Pull the lever D to unlock the rear anchorages.
5. Place the seat in the vertical "folded" position.
Forwards/backwards adjustment
From the seat cushion, lift bar A and slide the seat towards the
front or the rear.
Removing the bench seat
1 . Fold the seat to the vertical position.
2 . Grasp the two bars E underneath the seat.
3. The front anchorages unlock.
Re tting the bench seat
1. Position the front anchorages at the front stop of the runners.
2. Tilt the folded seat rearwards.
3. The rear anchorages then lock.
4. Unlock the seat back and lift it using the strap C .
CITROËN C8
Fiche_loueur_c8_an_01-2010.indd 3Fiche_loueur_c8_an_01-2010.indd 3 02/07/2010 18:29:5802/07/2010 18:29:58