Using the IVR for Administration
Cisco SPA100 Series Phone Adapters Administration Guide 141
B
• If the menu is inactive for more than one minute, the IVR times out. You will
need to re-enter the IVR menu by pressing the star key four times: ****. Your
settings take effect after you hang up the telephone or exit the IVR. The ATA
may reboot at this time.
• To enter the decimal points in an IP address, press the * (star) key.
For example, to enter the IP address 191.168.1.105, perform the following
tasks:
–Press these keys: 191*168*1*105
–Press the # (pound) key to indicate that you have finished entering the
IP address.
–Press 1 to save the IP address or press the * (star) key to cancel your
entry and return to the main menu.
IVR Actions
IVR Action Menu
Option
Choices and Instructions
Enter IVR Menu ****
Check Internet
Addressing Method
100
Set Internet Addressing
Method
101 DHCP: 0
Static IP: 1
PPPoE: Press 2
Check Internet IP
Address (INTERNET port)
110
Set Static IP Address
(INTERNET port)
111 Enter the IP address by using
numbers on the telephone key pad.
Use the * (star) key when entering a
decimal point.
Note: This option is available only after
you choose Static IP as the Internet
Connection Type, through option 101.
Check Network Mask 120
