Administration Settings
Reboot
Cisco SPA100 Series Phone Adapters Administration Guide 129
5
Click the Backup button to save the configuration information of the ATA. When the
dialog box appears, choose a location where you want to save the .cfg file. Tip:
Rename the file with a name that includes the date and time when you did the
backup.
Restore Configuration
User the Administration > Config Management > Restore Configuration page to
restore the ATA configuration settings from a previous backup. It is recommended
that you back up your current configuration settings before you restore a
configuration.
To open this page: Click Administration in the menu bar, and then click Backup &
Restore > Restore Configuration in the navigation tree.
STEP 1 Click Browse to locate the .cfg file on your computer.
STEP 2 Click Restore to restore the settings from the selected file.
Reboot
Use the Administration > Reboot page to power cycle the ATA (if necessary) from
the configuration utility. Alternatively, accomplish this task by pressing the RESET
button.
To open this page: Click Administration in the menu bar, and then click Reboot in
the navigation tree.
Click the Reboot button to power cycle the ATA. When the warning message
appears, read the information, and then click OK to reboot the ATA, or click Cancel
to abandon the operation. The ATA and any connected devices will lose network
connectivity during this operation.
