3838
3838
38
Technical Reference Booklet
SATA RAID USER MANUAL
Creating and deleting RAID sets is a function found in the BIOS. During bootup, the
following message will appear, pausing for a few moments to allow the user to
choose what to do:
Press Ctrl+S or F4 to enter RAID utility
An easy-to-use screen will appear with the following choices in the top left:
Create RAID Set
Delete RAID Set
Rebuild RAID Set
Resolve Conflicts
Below this will be listed the drives currently installed on the system.
The top right half of the screen displays directions and comments for the user. The
bottom right half lists the command keys:
Arrows up and down are Select Keys
ESC takes the user to the previous menu
Enter selects the user’s choice
Ctrl-E exits the utility
Creating RAID Sets
Becuase SATA Raid supports two drives, creating RAID Sets is a simple procedure.
1. Select “Create RAID Set.”
2. Choose either a “Striped” or “Mirrored” RAID Set.
3. Select if you want the utility to Auto Configure the RAID Set or if you want to manually
configure the RAID Set. For Striped Sets, you can change the chunk size. For
Mirrored Sets, you assign which is the Source and Target drives, as well as if you
want Disk Copy.
