- 17 - Hardware Installation Process
English
Step 4: Install Expansion Cards
AGP Card
1. Read the related expansion card’s instruction document before install the expansion card into
the computer.
2. Remove your computer’s chassis cover, necessary screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer’s chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
Please carefully pull out the small white-drawable
bar at the end of the AGP slot when you try to install/
uninstall the AGP card. Please align the AGP card to
the onboard AGP slot and press firmly down on the
slot. Make sure your AGP card is locked by the
small white-drawable bar.
