24
Introduction
How to install the
unit on your bicycle
Setting up the
computer
How to use the
computer
Others
Changing the
computer con-
figuration
Uploading the mea-
surement data
Setup of your
PC
Changing the
computer con-
figuration
Night-time setting
Set the time when the backlight lights up.
* When you do not want to turn on the backlight throughout the
day, set the start time and end time to the same hour.
Start time
Enter the start time when the backlight
lights up.
MODE
Increase the value
End time
Enter the end time when the backlight
lights off.
MODE
Increase the value
MODE
MODE
MENU
(press & hold)
(press & hold)
Changing
the settings
From “Night-time setting”
Setting the record interval
Set the second-scale interval to record the measurement data.
* The maximum recording time / maximum time for one trip that
can be recorded in the computer depends on the selected interval.
Record
interval
Maximum
recording time
(total time of
all trip data)
Maximum
time for one
trip
1-S
(1 second)
35 hours 12 hours
2-S
(2 seconds)
70 hours 24 hours
5-S
(5 seconds)
175 hours 60 hours
MODE
1-S 2-S 5-S
MODE
(press & hold)
Changing the
settings
Entering the total distance
You can enter the start value of the total distance, and add the trip
distance to it. Use this function when you renew and/or reset your unit.
* Enter the total distance in integer number only.
MODE
Increase the value
MODE
Move digits
(press & hold)
MENU
MENU
(00000 - 99999)
MODE
(press & hold)
Changing
the settings
MODE
MODE
MODE
MODE
From “Clock setting” (page 24)
To “Setting the record interval”
To “Selecting the speed unit” (page 25)
(press & hold)
Register
the setting
Register
the setting
Register
the setting
