
62
HR
● Provjerite da li je slavina za
dotok vode otvorena.
● Budite sigurni da je
odvodna cijev na mjestu.
ODABIR PROGRAMA PRANJA
Upuçujemo na tebelarni
pregled programa kako bi
izabrali najprikladniji program
pranja. Okrenite gumb
programatora na Ïeljeni
program da ga aktivirate.
Pridjekajte da zasvjetli
svjetlosni pokazatelj za “broj
okretaja centrifuge”. Kada
pritisnete tipku START perilica
çe pode‰avati tijek rada u
hodu. Pri izvodjenju
programa pranja gumb
programatora nepomiãno
stoji na odabranom
programu sve do kraja
ciklusa pranja.
UPOZORENJE:
Ako dodje do bilo kojeg
prekida elektriãne energije
tijekom rada perilice,
posebna memorija pohranit
çe postavke odabranog
programa i kada se
elektriãna energija vrati,
perilica çe zapoãeti sa
radom od mjesta gdje je
stala.
● Na kraju programa svi
svjetlosni pokazatelji “faze
pranja” dje svjetliti.
● Nakon zavr‰etka
programa pranja proãekajte
oko 2 minute da sigurnosni
uredjaj "otkljuãa" vrata.
● Iskljuãite perilicu
okretanjem gumba
programatora na poloÏaj
OFF (iskljuãeno).
● Otvorite vrata i izvadite
rublje.
ZA SVE VRSTE PRANJA
POTRAÎITE UPUTE U
TABELARNOM PRIKAZU
PROGRAMA, SLJEDITE
POSTUPKE PRIKAZANIM
REDOM
EN
● Ensure that the water inlet
tap is turned on.
● And that the discharge
tube is in place.
PROGRAMME SELECTION
Refer to the programme
guide to select the most
suitable programme.
Turning the selector knob
required programme is
activate.
Wait that a “Spin” indicator
light will go on.
Then press the START button.
When the START button is
pressed the machine sets
the working sequence in
motion.
The programme carries out
with the programme
selector stationary on the
selected programme till
cycle ends.
Warning: If there is any break
in the power supply while
the machine is operating, a
special memory stores the
selected programme
and,when the power is
restored, it continues where
it left off.
● At the end of the
programme all the wash
stage indicator lights will
illuminate .
● Wait for the door lock to
be released (about 2
minutes after the
programme has finished).
● Switch off the machine by
turning the programme
selector to the “OFF”
position.
● Open the door and
remove the laundry.
FOR ALL TYPES OF
WASH CONSULT THE
PROGRAMME TABLE
AND FOLLOW THE
OPERATIONS IN THE
ORDER INDICATED.