IM-P405-39 AB Issue 4
8
2.5 Timers information menu
This menu details the duration, start, repeat and stop time that has been selected. It
also displays which days have been selected. A ' - ' means that day has not been selected.
2.6 Alarm / error display messages
If an error occurs, an exclamation mark (!) will flash in the bottom left corner of the run
display (see Figure 2). The details of the error or alarm will appear on a new message
screen (see Figure 4), which can be accessed by scrolling through the run menu. Pressing
and holding the
OK
button for 3 seconds can clear a message and re-energize the alarm
relay(s). If the cause has not been corrected, the same message will reappear. If the
error or alarm is of a latching type, only the message will disappear. The alarm relay will
remain de-energised until the correct pass code is entered in the commissioning menu.
If more than one error or alarm has occurred, the next message will appear (in priority
order) after the previous one has been cleared. See Section 9, 'Fault Finding'.
If there are any problems with the product, error or alarm will appear. The example shows
a power failure.
Timer 1
duration
5 s
start
08:00
repeat
01:00
stop
16:00
sm-w-fs
Saturday
Friday
Thursday
(not selected)
Sunday
Monday
Tuesday
(not selected)
Wednesday
Fig. 3
Fig. 4 Error display
PRESS OK
TO CLEAR
