EN-14EN-13
Knowing your Modem Router
EN-14EN-13
H. Connection to ADSL line
- Gray
This port is for connection to your ADSL line. Connect your ADSL
line to this port. A RJ11 telephone cord is provided in the package.
I. Connections to Wired Computers
- Yellow
Connect your wired (non-wireless) computers to these ports. These
ports are RJ45, 10/100 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable. The ports are labeled
1 through 4, with onboard LEDs on the connectors.
J. Reset Button
The “Reset” button is used in rare cases when the Modem Router
may function improperly. Resetting the Modem Router will restore
the Modem Router’s normal operation while maintaining the
programmed settings. You can also restore the factory default
settings by using the “Reset” button. Use the restore option in
instances where you may have forgotten your custom password.
i. Resetting the Modem Router
Push and release the “Reset” button. The lights on the Modem
Router will momentarily flash. The “Power/Ready” light will
begin to blink. When the “Power/Ready” light becomes solid
again, the reset is complete.
ii. Restoring the Factory Defaults
Press and hold the “Reset” button for at least 10 seconds,
then release it. The lights on the Modem Router will
momentarily flash. The “Power/Ready” light will begin to
blink. When the “Power/Ready” light becomes solid again, the
restore is complete.
K. Power Jack – Black
Connect the included 15V/1A DC power supply to this jack.
L. WPS Button
(L)WPS
(I) LAN
(Local-Area Network)
(J) Reset
(H) ADSL Line
(K)Power
