36
36
Troubleshooting
Problem: The TES (Terminal Emulation Software) does not display
anything.
Solution: Make sure the TES’s communication parameters are correct. They
should be 115200 baud rate, no parity, 8-data bits, and 1 stop bit.
The cable is a null serial cable.
PROBLEM: The NMS cannot ping the ePowerSwitch System.
Solution: Make sure the network connection to the ePowerSwitch System is
good.
Solution: Make sure the cable is in good condition.
Solution: Make sure to set the Community String
Name the community with any lowercase name. (A UPS monitors a
designated community.)
Solution Make sure to set the Manager Table.
