66
Air conditioning
Replacing components
The air conditioning unit in the new Audi A6´05 does
not have to be completely removed from the vehicle
to replace components. Functional units such as the
evaporator or control motors, for example, are
replaced in the vehicle. The evaporator, for example,
will be available as a separate spare part in the
scope of the Customer Service process.
The evaporator is replaced by splitting the air
conditioning unit housing at the groove and pulling
the evaporator out sideways.
After fitting the new evaporator, the air conditioning
unit housing is closed by means of a service flap
prepared for Customer Service procedures. This
must be ordered as a separate spare part and is
fixed to the air conditioning unit housing by means
screws.
323_021
Cut-out for replacing the evaporator
Service flap
Service flap for replacing the evaporator
