pproved Optics, Inc. www.ApprovedOptics.com
Page 7 of 9
AA1403011-E6-A
10GBASE-LR SFP+ SMF
1310NM 10KM REACH LC
Receiver power (damage, Max)
1.5
dBm
Note:
1. Average optical power shall be measured using the methods specified
in
TIA/EIA-455-95.
2. Receiver sensitivity is informative. Stressed receiver sensitivity shall
be
measured with conformance test signal for BER =1x
10
-12
3. Vertical eye closure penalty and stressed eye jitter are the test conditions
for
measuring stressed receiver sensitivity. They are not the required
characteristic
of the
receiver.
4. Power budget is defined as the different between the Rx sensitivity and the
Tx.
Output power of the
interface.
5. Path penalty is intended as the power penalty of the interface between
back-to-
back and the maximum applied
dispersion.
8. DIGITAL DIAGNOSTIC
FUNCTIONS
The following digital diagnostic characteristics are defined over the Recommended
Operating Environment unless otherwise specified. It is compliant to SFF8472
Rev10.2 with internal calibration mode. For external calibration please contact our
sales staff.
Parameters
Symbol
Min.
Max.
Unit
Notes
Temperature
monitor
absolute
error
DMI_Temp -3
3
degC
Over operating
temp
Laser power
monitor
absolute
error
DMI_TX
-3
3
dB
RX power
monitor
absolute
error
DMI_RX
-3
3
dB
-1dBm to
-15dBm
range
Supply
voltage
monitor absolute
error
DMI_VCC
-0.08
0.08
V
Full operating
range
Bias current
monitor
DMI_Ibias
-10%
10%
mA
Table 5: Digital diagnostic specification ta
bl
e
