Problem Solution
Receiver does not show any
operation signs
Make sure AC adapter is securely
plugged into electrical outlet and in to
DC input connector on rear panel of
Distortion or unwanted noise
interfere with radio frequency
transmission (CD players, computers,
digital effects, in-ear monitor systems,
etc.)
Change receiver and transmitter to a
different frequency.
Reduce transmitter gain.
Replace transmitter batteries.
If using multiple systems, change one of
active systems frequency.
Adjust the squelch threshold.
No RF signal
Transmission frequency should be the
same as the receiving frequency, or
RF signal available but no audio
signal
Check connector to the microphone and
make sure receiver's squelch threshold is
adjusted to low
Transmitter could not be turned on Replace transmitter batteries
