35
Electrical connection
Information about the mains power sup-
ply, the nature of the power and the fuses
to be used are given on the washing
machine name plate at the back of the
washing machine.
If the washing machine is directly connected to the electrical installation (fixed
connection), insert a two-pole switch with a contact opening distance of not less
than 3 mm.
This washing machine can only be connected to 230 V single phase power
supply.
Check that the subscriber’s meter and fuses are capable of carrying the current
required by the washing machine, allowing for other electrical equipment
connected at the same time.
Rating of line fuses (one for each phase):
10 A in 230 V.
If the mains power supply cable has to be replaced, have the work done by
the After Sales Service to make sure that it is done safely.
Make sure that the earthing connector is conform with the rules in force.
We cannot be held responsible if accidents or incidents are caused by a
non-existent or defective earth.
Installation and connection instructions
