Dil ID: 8
Dil Adı: italy
Dil Kodu: it2tayfun Prodotti del Marchio AEG
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



Operating instructions
38
Wash Water Cooling
3
The wash water is cooled prior to pumping out at the end of the main
washing cycle (by adding cold water). (This setting is only effective for
(COTTONS/LINEN) at a temperature of over 40 °C.)
As supplied from the factory, the wash water cooling function is not
enabled.
Enabling the wash water cooling function:
0 1. Turn the program selector to (SHORT SPIN).
2. Press the (PRE WASH) button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, (MAIN-
WASH) flashes on the program progress indicator for 5 seconds.
3. Release the (PRE WASH) button while (MAINWASH) is
flashing.
Once the indicator has stopped flashing, the wash water cooling func-
tion is enabled. It continues to be enables until specifically disabled.
4. If you wish to check whether the wash water cooling function is
enabled:
Turn the program selector to (SHORT SPIN).
Press the (PRE WASH) button briefly.
If the (MAINWASH) indicator on the program progress display
flashes, the wash water cooling function is enabled.
Disabling the wash water cooling function:
0 1. Turn the program selector to (SHORT SPIN).
2. Press the (PRE WASH) button for at least 5 seconds.
As soon as the button is pressed, (MAINWASH) flashes on the
program progress display. After 5 seconds (MAINWASH) ceases
to flash and illuminates continuously for 5 seconds.
3. Release the (PRE WASH) button while (MAINWASH) is
continuously illuminated.
Once (MAINWASH) has ceased to be illuminated, the wash
water cooling function is disabled.
Additional Rinse and Wash Water Cooling
The additional rinse and wash water cooling functions can be com-
bined. Enable as under Additional Rinse and Wash Water Cooling.