
1.6 Installation
• The appliance is heavy, be careful
when you move it.
• Do not transport your appliance with-
out the transit bolts, you can damage
internal components and cause leak-
ages or malfunctions.
• Do not install and connect a damaged
appliance.
• Make sure to remove all packaging
and transit bolts before first use.
• Make sure that the mains plug is dis-
connected from the mains socket dur-
ing installation.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• When you install the appliance on a
carpet floor, make sure that there is air
circulation between the appliance and
the carpet. Adjust the feet to have the
necessary space between the appli-
ance and the carpet.
Water connection
• Do not connect the appliance with old
hoses. Only use new hoses supplied
with the appliance.
• Make sure not to cause damage to the
water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long
time. Let the water flow for some mi-
nutes, then connect the inlet hose.
• The first time you use the appliance,
make sure that the water hoses and
the couplings do not have leakages.
Electrical connection
• Make sure that the appliance is con-
nected to a correctly installed earthed
power outlet.
• Make sure that the electrical informa-
tion on the rating plate agrees with
the power supply.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
• Do not replace or change the mains
cable. Contact the service centre.
• Make sure not to cause damage to the
mains plug and cable.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
• If this appliance is supplied from a
cord extension set or electrical porta-
ble outlet device, the cord extension
set or electrical portable outlet device
must be positioned so that it is not
subject to splashing or ingress of
moisture.
• If the supply cord of this appliance is
damaged, it must be replaced by the
manufacturer, its service agent or simi-
larly qualified persons to avoid a haz-
ard.
1.7 Discard the appliance
1.
Disconnect the mains plug from the
mains socket.
2.
Cut off the mains cable and discard
it.
3.
Discard the door catch. This pre-
vents children or pets being acci-
dentally closed inside the appliance.
There is a risk of suffocation (only for
front-loading appliances).
2. TECHNICAL INFORMATION
Dimensions Width / Height / Depth 605 / 850 / 605 mm
Total depth 640 mm
4
www.aeg.com/au