Problem Possible solution
Too much foam in the
drum during the washing
cycle.
• Reduce the quantity of detergent.
After the washing cycle,
there are some deter-
gent residues in the dis-
penser drawer.
• Make sure that the flap is in the correct position (UP for
powder detergent - DOWN for liquid detergent).
• Make sure you have used the detergent dispenser accord-
ing the indications given in this user manual.
After the check, activate the appliance. The programme continues from the point of
interruption.
If the problem occurs again, contact the Authorised Service Centre.
If the display shows other alarm codes. Deactivate and activate the appliance. If the
problem continues, contact the Authorised Service Centre.
14. CONSUMPTION VALUES
Stated values are obtained in laboratory conditions with relevant stand-
ards. Different causes can change the data: the quantity and type of
laundry and ambient temperature. Water pressure, the supply voltage
and the temperature of inlet water may also affect the washing pro-
gramme duration.
Technical specifications may be changed without prior notice to improve
the quality of product.
During the washing programme, the Prosense technology can vary the
wash duration and the consumption values. For more details see 'The
Prosense load detection' paragraph in 'Daily Use' chapter.
Programmes Load
(kg)
Energy
consump-
tion (kWh)
Water
consump-
tion (litre)
Approxi-
mate pro-
gramme
duration
(minutes)
Remain-
ing mois-
ture (%)
1)
Blanc/Couleurs 60°C 10 2,04 87 240 52
Blanc/Couleurs 40°C 10 1,40 83 210 52
Synthétiques 40°C 3 0,80 61 140 35
Délicats 40°C 3 0,56 75 95 35
Laine/Soie 30°C 1,5 0,42 62 75 30
Standard cotton programmes
www.aeg.com32
