8.7 Installation of the CleanAir
Control filter
The CleanAir Control filter is an active
carbon filter which absorbs bad odours
and permits to maintain the best flavour
and aroma for all foodstuffs without risk
of odour cross contamination.
On delivery the carbon filter is in a plas-
tic bag to maintain it’s duration and
characteristics. The filter should be
placed behind the flap before the appli-
ance is turned on.
1.
Open the flap cover.
2.
Remove the filter from the plastic
bag.
3.
Insert the filter in the slot found in
the back of the flap cover.
4.
Close the flap cover.
The filter should be handled
carefully so fragments do not
loosen from the surface. The fil-
ter should change once every six
months.
8.8 Door reversibility
In case you want to change the opening
direction of the door, contact the near-
est After Sales Service Force. The After
Sales Service specialist will carry out the
reversibility of the doors at your cost.
9. TECHNICAL DATA
S83200CMM0 S83600CMM0
Dimension
Height 1850 mm 2010 mm
Width 595 mm 595 mm
Depth 658 mm 658 mm
Rising Time 18 h 18 h
Voltage 230 - 240 V 230 - 240 V
Frequency 50 Hz 50 Hz
The technical information are situated in
the rating plate on the internal left side
of the appliance and in the energy label.
10. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
. Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
ENGLISH 19
