2.2 Switching on
To switch on the appliance do these
steps:
1.
Connect the mains plug to the pow-
er socket.
2.
Press the appliance ON/OFF button
if the display is off.
3.
The alarm buzzer may sound after a
few seconds.
To reset the alarm refer to "High
temperature alarm".
4.
If "dEMo" appears on the display,
the appliance is in demonstration
mode. Refer to "Troubleshooting...".
5.
The temperature indicators show the
set default temperature.
To select a different set temperature re-
fer to "Temperature regulation".
2.3 Switching off
To switch off the appliance do these
steps:
1.
Press the ON/OFF button for 5 sec-
onds.
2.
The display switches off.
3.
To disconnect the appliance from
the power disconnect the mains
plug from the power socket.
2.4 Switching off the fridge
To switch off the fridge:
1.
Press the Mode button until the cor-
responding icon appears.
The Fridge Off indicator flashes.
The fridge indicator shows dashes.
2.
Press the OK button to confirm.
3.
The fridge Off indicator is shown.
2.5 Switching on the fridge
To switch on the fridge:
1.
Press the fridge temperature regula-
tor.
Or:
1.
Press the Mode button until the cor-
responding icon appears.
The Fridge Off indicator flashes.
2.
Press the OK button to confirm.
3.
The fridge Off indicator goes off.
To select a different set temperature re-
fer to "Temperature regulation".
2.6 Temperature regulation
The set temperature of the fridge and of
the freezer may be adjusted by pressing
the temperature regulator button.
Set default temperature:
• +5°C for the fridge
• -18°C for the freezer
The temperature indicators show the set
temperature.
To restore the set default tem-
perature switch off the appliance.
The set temperature will be reached
within 24 hours.
Fluctuations of some degrees around set
temperature are normal and does not
mean any fault in the appliance.
After a power failure the set tem-
perature remains stored.
2.7 Child Lock function
To lock the buttons on the display unit,
activate the Child Lock function.
To switch on the function:
• Press the fridge and freezer compart-
ment buttons until the child lock icon
is lit.
To deactivate, use the same key combi-
nation.
2.8 Extra Humidity function
If you need to increase the humidity in
the refrigerator, we suggest activating
the Extra Humidity function.
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The Extra Humidity indicator flashes.
2.
Press the OK button to confirm.
The Extra Humidity indicator is
shown.
To switch off the function:
1.
Press the Mode button until the Ex-
tra Humidity indicator flashes.
2.
Press the OK button to confirm.
3.
The Extra Humidity indicator goes
off.
6
www.aeg.com
