
8.6 Removing the shelf
holders
A
B
C
Your appliance is equipped with shelf re-
tainers that make it possible to secure
the shelves during transportation.
To remove them proceed as follows:
1.
Move the shelf holders in the direc-
tion of the arrow (A).
2.
Raise the shelf from the rear and
push it forward until it is freed (B).
3.
Remove the retainers (C).
8.7 Installation of the CleanAir
Control filter
The CleanAir Control filter is an active
carbon filter which absorbs bad odours
and permits to maintain the best flavour
and aroma for all foodstuffs without risk
of odour cross contamination.
On delivery the carbon filter is in a plas-
tic bag to maintain it’s duration and
characteristics. The filter should be
placed behind the flap before the appli-
ance is turned on.
1.
Open the flap cover.
2.
Remove the filter from the plastic
bag.
3.
Insert the filter in the slot found in
the back of the flap cover.
4.
Close the flap cover.
The filter should be handled
carefully so fragments do not
loosen from the surface. The fil-
ter should change once every six
months.
8.8 Door reversibility
In case you want to change the opening
direction of the door, contact the near-
est After Sales Service Force. The After
Sales Service specialist will carry out the
reversibility of the doors at your cost.
ENGLISH 17