Problem Possible cause Possible solution
The quantity of detergent
was too much.
Make sure that you add the
correct quantity of detergent
in the dispenser before you
start a programme.
Dry water drop
stains on glasses
and dishes.
The released quantity of
rinse aid was not sufficient .
Increase the released quanti-
ty of rinse aid.
The quality of the detergent
can be the cause.
Try a different brand of de-
tergent.
The dishes are wet. • The programme had no
drying phase.
• The programme had a
low temperature drying
phase.
For better drying results,
keep the door ajar for some
minutes.
The dishes are wet
and matt.
The rinse aid dispenser is
empty.
Make sure that there is rinse
aid in the rinse aid dispenser.
The quality of the rinse aid
can be the cause.
Try a different brand of rinse
aid.
The quality of the combi
detergent tablets can be
the cause.
• Try a different brand of
combi detergent tablets.
• Activate the rinse aid dis-
penser and use the rinse
aid together with the com-
bi detergent tablets.
Activating the rinse aid
dispenser with the multitab
function activated
The appliance must be in setting
mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
1. Make sure that the programme marker
on the programme knob is aligned
with the off position.
2. Press and hold Multitab. At the same
time turn the programme knob coun-
terclockwise until the programme
marker is aligned with the first pro-
gramme on the control panel.
3. Release Multitab when the display
shows the setting of the water soften-
er.
4. Turn the programme knob counter-
clockwise until the programme marker
is aligned with the second washing
programme on the control panel.
5. The display shows the setting of the
rinse aid dispenser.
Off
On
6. Press Multitab to change the setting.
7. To confirm the setting, turn the pro-
gramme knob until the programme
marker is aligned with the off position.
TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 596 / 818-898 / 575
Electrical connection Refer to the rating plate.
ENGLISH
19
