Manual adjustment
Turn the water hardness dial to the posi-
tion 1 or 2.
Electronic adjustment
The appliance must be in setting
mode. Refer to ‘SETTING AND
STARTING A PROGRAMME’.
1. Make sure that the programme marker
on the programme knob is aligned
with the off position.
2. Press and hold Multitab. At the same
time turn the programme knob coun-
terclockwise until the programme
marker is aligned with the first pro-
gramme on the control panel.
3. Release Multitab when the display
shows the setting of the water soften-
er.
•
Example:
= level 5.
4. Press Multitab again and again to
change the setting.
5. To confirm the setting, turn the pro-
gramme knob until the programme
marker is aligned with the off position.
FILLING THE SALT CONTAINER
CAUTION!
Only use dishwasher salt. Other
products can cause damage to
the appliance.
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it, af-
ter you fill the salt container, start
a programme.
1.
Turn the cap counterclockwise and
open the salt container.
2.
Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4.
Remove the salt around the opening
of the salt container.
5.
Turn the cap clockwise to close the
salt container.
ENGLISH
11
