Prodotti del Marchio AEG Electrolux

11Basic operation

The Options menu

• Here go to the desired setting using the direction buttons ( or ). In the

info status bar your position within the menu is always shown.

• For the option DELAY START see the section “Setting a delay start” for the op

tion 3 IN 1 see the section “Before using for the first time”

• Use the OK/START button to switch from the menu item SETTINGS… to the

Settings submenu.

The Settings submenu

Here go to the desired setting using the direction buttons ( or ). In the info

status bar your position within the submenu is always shown.

• LANGUAGE

To set the language of the text line in the display; also see the section “Reset

ting the language”.

• WATER HARDNESS

To set the value for water hardness electronically (value range 1 to 10).

• RINSE AID

When option 3 IN 1 is activated: Switch rinseaid addition function on or off.

When option 3 IN 1 is not activated: The rinseaid addition function is always

switched on, even if OFF is selected for RINSEAID.

• SOUND VOLUME

To set the sound volume of the acoustic signals (value range 0 to 5); at 0 the

acoustic signals are switched off.

• BRIGHTNESS

To set the brightness of the display (value range 1 to 10).

• CONTRAST

To set the contrast of the display (value range 1 to 10).

Adjusting an option/setting

1. Go to the option or setting that you wish to adjust.

2. Press the OK/START button. The value that is currently set will flash.

3. Using the direction buttons ( or ) select the desired value.

4. Press the OK/START button. The newly set value is lit without flashing.

5. Using the direction buttons ( or ) you can select another option or setting.

3 A selected value is accepted using the OPTION button. In the display the first en

try in either the Options or Settings menu is displayed.

3 You can abort the setting procedure using the RESET button.

1. not available with all models