2. The dishwasher filter system comprises a
coarse filter ( A ), a microfilter ( B ) and a
flat filter. Unlock the filter system using
the handle on the microfilter.
3. Turn the handle about 1/4 a turn anti-
clockwise and remove the filter system.
4.
Take hold of the coarse filter ( A ) by the
handle with the hole and remove from
the microfilter ( B ).
5. Clean all filters thoroughly under run-
ning water.
6. Remove the flat filter from the base of
the washing compartment and clean
both faces thoroughly.
7. Put the flat filter back in the base of the
washing compartment and ensure that
it fits perfectly.
8.
Place the coarse filter ( A ) in the mi-
crofilter ( B ) and press together.
9. Put the filter combination in place and
lock by turning the handle clockwise to
the stop. During this process ensure
that the flat filter does not protrude
above the base of the washing compartment.
WARNING!
NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters
will produce poor washing results and may result in damage to the appliance.
Cleaning the spray arms
NEVER try to remove the spray arms.
If residues of soil have clogged the holes in the spray arms, remove them with a cocktail
stick.
Care and cleaning
23
