Programme Degree of
soil
Type of load Programme description Consumption val-
ues
1)
Prewash
Main wash
Intermediate rinse
Final rinse
Drying
Duration (minutes)
Energy (kWh)
Water (litres)
ECO 50°
3)
Normal soil Crockery and
cutlery
120 - 130
0,8 - 0,9
12 - 13
PREWASH Any Partial load
(to be com-
pleted later in
the day)
4)
11
0,1
5
1) The consumption values are intended as a guide and depends on the pressure and the temperature of the water
and also by the variations of the power supply and the amount of dishes.
2) Ideal for washing a partially loaded dishwasher. This is the perfect daily programme, made to meet the needs
of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery.
3) Test programme for test institutes.
4) This programme does not require the use of detergent
Select and start a washing programme
Select the washing programme and delay start with the door slightly opened. The start of
the programme or the countdown of the delay start will occur only after the closure of the
door. Until then it is possible to modify the settings.
1. Check that the baskets have been loaded correctly and that the spray arms are free to
rotate.
2. Check that the water tap is opened.
3.
Press the On/Off button. The dishwasher must be in setting mode. (the end of pro-
gramme indicator light is flashing).
4.
Press the programme selection/RESET button until the light corresponding to the
required washing programme illuminates (see "Washing programmes" chart).
5. Close the dishwasher door, the programme starts automatically.
Interrupt or cancel a washing programme in progress ONLY if it is absolutely necessary.
Attention! Hot steam may escape when the door is opened. Open the door carefully.
Interrupt a washing programme in progress:
• Open the dishwasher door; the programme will stop. Close the door; the programme will
start from the point at which it was interrupted.
Cancel a washing programme in progress
Select and start a washing programme
73
